Shines like chrome, but does with no yellowish tint!
The kit contains everything needed for coating automobile discs!
An excellent alternative to chrome-plating! Does not require the use of high power voltage transformers!
The "COPY-CHROME" kit is used for the application of a glossy hard nickel-cobalt coating on automobile discs. The coating can be applied to copper, "primary copper" coating, "bright red copper", nickel, "brilliant nickel" coating, "chemical nickel", and "primary nickel".
This kit contains everything necessary for the application of a glossy metallic coating on aluminium automobile discs.
The "COPY-CHROME" kit for chrome-plating discs provides the same advantages as the application of a decorative chrome-plating: gloss, durability, corrosion resistance, but at the same time does not require large investment in production facilities, does not produce harmful emissions, and there is no problem with waste utilization.
To chrome-plate automobile discs, it is necessary to initially treat the surface with zincate treatment, then apply the "primary copper" coating. Due to the high levels of dissipative properties of the electrolytes in question, it is possible to chrome-plate discs with any type of complex surface shapes.
Using this kit, you can coat an area of 55-60 m2. Once you have set up your facility and started chrome-plating discs, you will only need to purchase the necessary chemicals.
Stages of the process in chrome-plating aluminium surfaces:
- Polishing the surface to full shine
- Treatment with the "UNIVERSAL CLEANER"
- Treatment with the "ZINCATE ACTIVATOR"
- Application of the "PRIMARY COPPER" coating
- Application of the "COPY CHROME" coating for automobile disks
Usage
This kit is used in the application of a glossy, nickel cobalt coating to aluminium and steel automobile discs.
Requirement
- Distilled water
Associated kits
- "FLASH BEST COPPER" copper plating kit
- "BRIGHT RED COPPER" kit for metal plating
- "PRIMARY NICKEL" kit
- "BRIGHT NICKEL" metallization kit
- "UNIVERSAL CLEANER" KIT
- "ZINCATE ACTIVATOR" kit
"COPY CHROME" kit for coating the automobile disks
- Seven poly-vinyl storage containers (500mm x 600mm x 900mm)
- Power transformer; 100 amperes
- Two heaters with protective coating; x1000 Watts
- Two stainless steel heaters; x1000Watts
- Four copper electrodes for primary copper-plating (450mm x 520mm)
- Four electrodes for copy-chrome (450mm x 520mm)
- Eight polypropylene fabric electrode covers
- Four large packs of heat insulation floats
- Two packs of "CRYSTAL COPY-CHROME SALT part "A" (for 180 liters)
- Two packs of "CRYSTAL COPY-CHROME SALT part "B" (for 180 liters)
- One pack of "LEVELING ADDITIVE" (for 180 liters)
- One pack of "BRILLANCE ADDITIVE" (for 180 liters)
- One kit of "ZINCATE ACTIVATOR" (for 180 liters)
- One kit of "PRIMARY COPPER" (for 180 liters)
- One kit of "BRIGHT RED COPPER" (for 180 liters)
- Four pumps for filtration and stirring of electrolyte
- Four cartridge-filters with coal filler
- Four mini-pumps for stirring the electrolyte
- Two containers with as-chemical (to correct the pH level)
- Three copper contact bars (12mm x 600m)
- Copper contact wire
- Set of polishing napkins
- Polishing paste "Autosol"
- Pair of rubber gloves
- Protective glasses
- Thermometer
- User Manual
- FREE TECHNICAL SERVICE
Each kit includes a detailed User Manual with a step-by-step description of the preparation and execution processes of metallization. All the chemicals included in the kits are preliminarily weighed and packed in the required proportions, so all that is needed in order to get the working electrolyte solution is to dissolve those packets in distilled water, in the prescribed sequence.
GENERAL DATA. Working temperature of the electrolyte: 50-60°C. Density of cathode current: 1-2.5 A/dm2. Deposition rate of nickel-cobalt coating at a cathode current density of 1.5-1.8 A/dm2: 16-18 microns per hour. During the process of "copy-chrome" coating, the electrolyte is partially consumed, and the electrode dissolves. One electrode (450mm x 520mm) is sufficient for a surface area of 45 m2 with a thickness of 5 microns. While implementing the process, the electrode must be placed inside the polypropylene fabric electrode cover. During the use of the electrolyte, after the application of nickel coating on an area of 9-10 m2 (or after 1000 ampere/hours of conducted electricity), the electrolyte must be replenished, by adding 320-360 ml of "brilliance additive" along with 360-400 ml of "levelling additive".
| КХД-240 | Комплект КОПИ-ХРОМИРОВАНИЕ А/М ДИСКОВ на 210 л | |
 |
