The compound for the electropolishing of steel is used for the electrochemical polishing of a steel surface, a reduction of its roughness, an improvement of its protective and decorative properties, and increased shine.
After preparation, the solution for electropolishing of steel possesses high dissipative power and allows you to carry out simultaneous etching, activation and polishing of the steel surface.
Usage
The compound is used for the electrochemical polishing of a steel surface, a reduction of its roughness, an improvement of its protective and decorative properties and increased shine.
Associated kits
"Test kit" (for 5 liters of solution)
- 1 storage container with a lid (5 liters of solution)
- 1 container of "ELECTROPOLISHING SOLUTION" (for 5 liters of solution)
- 1 container of "ETCHING SOLUTION" (for 5 liters of solution)
- Rubber gloves
- User Manual
- FREE TECHNICAL SUPPORT
"Small kit" (for 10 liters of solution)
- 1 storage container with a lid (10 liters of solution)
- Stainless steel heater; х200W
- 3 containers of "ELECTROPOLISHING SOLUTION" (for 10 liters of solution)
- 1 container of "ETCHING SOLUTION" (for 10 liters of solution)
- Rubber gloves
- User Manual
- FREE TECHNICAL SUPPORT
"Medium kit" (for 20 liters of solution)
- 1storage container with a lid (20 liters of solution)
- Stainless steel heater; х400W
- 1 container of "ELECTROPOLISHING SOLUTION" (for 20 liters of solution)
- 1 container of "ETCHING SOLUTION" (for 20 liters of solution)
- Rubber gloves
- User Manual
- FREE TECHNICAL SUPPORT
"Large kit" (for 50 liters of solution)
- 1 storage container with a lid (50 liters of solution)
- Stainless steel heater; х1000W
- 2 containers of "ELECTROPOLISHING SOLUTION" (for 50 liters of solution)
- 2 containers of "ETCHING SOLUTION" (for 50 liters of solution)
- Set of polishing cloths
- Polishing paste "Autosol"
- Rubber gloves
- User Manual
- FREE TECHNICAL SUPPORT
GENERAL DATA. Working temperature of electrolyte: 70-80°С. Anodic current density: 35-40 A/dm2. Duration of treatment of steel surface: 7-12 minutes. One liter of the solution allows you to process items with a total surface area of 1.9 m2.
| КЭС05 | Комплект "ЭЛЕКТРОПОЛИРОВАНИЕ СТАЛИ" на 5 литров раствора | |
 |
|
| КЭС15 | Комплект "ЭЛЕКТРОПОЛИРОВАНИЕ СТАЛИ" на 15 литров раствора | |
|
|
| КЭС30 | Комплект "ЭЛЕКТРОПОЛИРОВАНИЕ СТАЛИ" на 30 литров раствора | |
|
|
| КЭС50 | Комплект "ЭЛЕКТРОПОЛИРОВАНИЕ СТАЛИ" на 50 литров раствора | |
|
